Autumn Tree Birthday Card (and other “Positively Negative” cards)

Posted in Birthday Cards, Cards, Get Well/Sympathy, Other, Thank You Cards, Wedding/Anniversary by lisababitz

Autumn Tree Birthday Card (and other “Positively Negative” cards)

I was asked to be the guest hostess for this week’s Mod Squad Challenge, and my challenge, called Positively Negative, is to create a project using the negative of a die (manual or electronically cut), punch, or hand-cut shape. (Sadly, this site is no longer active.)

This card was originally posted in my stamptv gallery (Sadly, this site is no longer active.), but I’m posting it here to show an example of a card where I did reverse masking (using the negative of a die) to create the sponged background for my tree image.

I used the Gina K Designs “The Giving Tree” set. Card stock used was gina k ivory and dark chocolate, and ink was gina k dark chocolate and memento desert sand. I used Flower Soft (autumn and nut brown) for the leaves. As mentioned above, a mat was made with the Spellbinders Wonky Squares die (discontinued?) to create the background for the tree. Yarn, a button and a gina k wood leaf finished it off.

Two more cards using the negative to sponge the background for my stamped images are below:

You can see the original post in my stamp tv gallery. (Sadly, this site is no longer active.)

The sentiment and floral image on this card are from the “With Love & Prayers” set by GKD. Gina K Wild Lilac and Moonlit Fog inks with a square mask were used to create the background. The image and sentiment were stamped with Gina K’s Edible Eggplant ink.

and

My card was originally posted in my stamp tv gallery. (Sadly, this site is no longer active.)

This is a card I CASED after watching Melanie Muenchinger’s tutorial (HERE). The stamp sets I used are Gina K Designs “A Year of Flowers 2” and “All Occasion Tags” (retired?) for the sentiment. I used the Spellbinders Wonky Square die for this reverse mask as well.

I also did a card a few weeks ago where I used the negative of a flower die cut to create the template for my image using the Confetti Cluster Stamping technique.

You can see my original post (HERE).

And finally, here is a sample of where I used the actual negative on my card of a heart I created and cut with my Silhouette.

You can see the original post in my stamptv gallery. (Sadly, this site is no longer active.)

I can’t wait to see your “Positively Negative” creations over at the Mod Squad Challenge Blog this week!

Thanks for checking out my post!

This content uses referral links as described in the disclosure policy on my sidebar.

17May2015

Pop-Up Wedding Cake Card

Posted in Cards, Interactive, Wedding/Anniversary by lisababitz

Pop-Up Wedding Cake Card

Join us over at Perfectly Rustics for a new challenge. This fortnight, the challenge is to create a pop-up card. (http://perfectlyrustics.com/2015/05/18/prdc-no-48-pop-up/)

The pop-up portion of my card was created using the Sizzix “Cake, Three Tier, 3-D” Bigz Die and my Big Kick machine. The base pieces were cut from Gina K Innocent Pink heavy base weight card stock. The die provides the bases and supports for the three tiers, along with a bride and groom and a candle, as shown below. The sides are 1 inch strips (of whatever material you want the sides to be) cut with a trimmer.

It was suggested by the designer of the die (Karen Burniston) that the sides of the cake be cut from a material that is resistant to folding since these circular sides flatten somewhat when the card is closed, and you want these sides to become circular again once it is opened. Grunge paper and acetate are good choices. If you choose to use card stock, she suggests crimping the strips because it will hide any folds that may end up on these pieces when the card closes and opens.

With this in mind, I decided to go with crimped card stock, but I wanted them to be a little less likely to tear while still being flexible, so I covered my white card stock strips with crumpled tissue paper from Hallmark. (I had recently discovered the tissue paper technique and had posted a few projects using it HERE.) I covered my flat strips with decoupage, then placed the crumpled tissue paper on the strips, flattened them, trimmed off the excess tissue paper, and then sealed each of them with a top coat of the decoupage. Once the strips were dry, I ran each of them through my crimper.

Also at Karen Burniston’s suggestion, I cut a “plate” using one of the dies from the Spellbinders Stately Circles set, and assembled my cake on this piece before adhering it to my card base.

The bride and groom on the top of the cake were cut from Recollections glitter paper. The flowers on the top tier are by Offray which I found in the DIY Wedding aisle at the craft store. The leafy flourishes were cut from a die from the Heartfelt Creations (Spellbinders) “Cut Mat Create 2A Die” set and cut into smaller pieces. The hearts were cut using a Creative Memories Two Heart Punch.

The card base is two pieces of heavy chipboard covered with papers from the My Mind’s Eye Simply Delightful 12×12 paper pad and attached in the center with Washi tape. I needed to use the Washi tape to keep the center of the card base somewhat flexible to allow the card to open and close once the cake was glued to the inside. I think that building the cake on the “plate” panel was easier perhaps than building it directly on the card base, but I also think that this “plate” makes closing the card VERY difficult! I am definitely going to have to play around with this some more to see if the plate could be done differently or eliminated or if there is another way to make the base to better accommodate the plate.

My card is meant to be displayed opened with the cake popped-up. My card front is very simple with some of the same paper I used on the inside along with a couple of hearts. To keep the card closed until the recipient is ready to open it, I loosely tied a piece of white ribbon around the whole card. I left off a sentiment because this card could be used for a wedding or an anniversary. I don’t think a sentiment is needed, but it could always be added later if desired in the form of a small banner or tag, for example. Even though I chose to make my card front very simple, you can see that it is possible to display the card “closed” as shown, so you can make your card front as elaborate as you want.

Here are a few views of the card as it opens. The circular tops of each tier are folded when the card is closed and open flat when card is completely opened. Notice how the sides of each tier kind of fold together when the card is closed. You don’t want to see a sharp fold on the sides of the cake when it is opened. This is why using a fold resistant material or a crimped piece of card stock is recommended.

Now it’s your turn. Create a Pop-Up card, and enter it in the challenge over at Perfectly Rustics. I’d love to see your project!

Thanks for checking out my card post!

This content uses referral links as described in the disclosure policy on my sidebar.

27Feb2015

Quilled Iris

Posted in Cards, Easter, Get Well/Sympathy, Other, Wedding/Anniversary by lisababitz

Quilled Iris

It had been a while since I had done any quilling, so I thought I’d make a quilled card to enter in this week’s Mod Squad Challenge called “Spring Forward” where we are encouraged to use flowers, birds, butterflies, hummingbirds, etc. and bright, beautiful colors to make a Spring themed card. (Sadly, this site is no longer active.)

I sponged Gina K Wild Lilac ink on white card stock and glued my quilled iris and decorative swirls on this panel. Then, I created a recessed frame with thick fun foam and Spellbinders oval dies.

The printed paper is from a digital set I bought from a store on Etsy called The Pixel Posy. The set is called “Vintage William Morris digital paper designs//Art Nouveau background paper pack//Blue and purple flower digital paper.” HERE is the link.

This card used a number of quilled shapes: teardrops, half circles, marquises and wheatears (leaves). I used instructions by “Quilled Creations” to create the iris.

I had made a few other quilled cards in the past that I had posted in my StampTV Gallery. (Sadly, this site is no longer active.) I’m including them here as well.

This sympathy card was the first one I did back in May 2013. I used a basic marquise shape for the flowers and leaves. The sentiment was from the Gina K Designs “All Occasion Tags” Stamp set. The tag was cut with a die from the Spellbinders Grommet Tag set, and the embossing folder is Darice Corner Scroll.

I used the same embossing folder and marquise shapes to create two more – a wedding card and a confirmation card.

The sentiment on the wedding card is from the Gina K Designs “Always and Forever” duo stamp set. I purchased the stamp for the confirmation card on Ebay, and it is unmarked so I have no idea what company made it.

The next card I made was for a bridal shower. I used teardrops to make the umbrella.

The bride and groom stamp is called “Happy Couple” by Stampendous! The greeting was done on the computer. I used the Darice Stripe embossing folder on this card.

Quilled Creations makes a great tool called “Circle Template Board” that makes it easy to create consistent and perfectly proportioned quilled shapes. I also use their slotted quilling tool to roll the circles; the slot makes it easy to get the paper rolls started.