Split Diagonal Easter Card

(inside: Wishing you an egg-cellent Easter filled with joy)

This card features “Watercolor Stripe” paper from The Paper Studio, the “Happy Easter” greeting from Purple Daisy Design, and a cute Easter die I found on Amazon.

Recollections Navy and White and Gina K Designs Powder Blue card stock was also used. The inside greeting was computer generated.

This layout was inspired by Lisa Curcio’s video, but my measurements are different. I actually used one of my Mosaic Moments scrapbooking dies from the “30 Degrees” set (not available at this time?) to cut my patterned paper piece, but I included (my) measurements below to cut without the die if interested….

1. Choose 3 coordinating patterns and/or colors with the following *measurements:

2. To create the upper left (printed) piece, mark 2 5/8 inches across the top and 2 inches down the right side, and cut those connecting marks. Then cut from the 2 inch mark to the bottom left corner.

3. Adhere this piece to the upper left corner of the 4 x 5 1/4 inch (blue) panel.

4. Then take the small 1 1/2 x 2 1/2 (green) piece and adhere it to the (blue) panel making sure the left side and bottom line up as shown. Flip the panel over and cut off the overhanging parts.

5. Once trimmed, you should have a 4 x 5 1/4 panel that can be adhered to an A2 card base.

*The measurements listed above are what “happened” when I used my die to cut the printed panel. This is a very forgiving layout; the printed panel does not have to be exactly like mine. Once you cut your printed panel to that shape, adhere the small piece, trim, and you are good to go!

Thanks for checking out my card project!

This content uses referral links as described in the disclosure policy on my sideba