Joy Nativity

Joy Nativity

zDSC_7568

(inside:  May the wonder of his love touch you this Christmas and bring you peace & happiness in the new year)

This card features the “Joy Nativity” die from Cottage Cutz and the “Rectangle Peek-a-boo Window” die from My Favorite Things.  The window die creates a rectangle surrounded by faux stitching, but the die does not cut the outer edge of the frame so I used my trimmer for that.

The card stock I used was Papertrey Ink Rustic Cream, Gina K Kraft, and a brown from the Recollections “Coffee and Cream” heavy weight card stock pack.  I pounced Gina K Kraft ink on the large, background panel to add a subtle texture.  The edges were inked with Gina K Dark Cocoa ink.

The inside sentiment was from the “Sentimental Holidays” set (retired?) from Gina K Designs and was stamped with GK Charcoal Brown ink.

Thanks for checking out my card project!

This content uses referral links as described in the disclosure policy on my sidebar.

CAS Red and Green Christmas

CAS Red and Green Christmas

wDSC_7560.jpg

This CAS card features stamps from the Gina K Designs “Merry and Bright” stamp set, GK Cherry Red ink and GK Christmas Pine card stock and ink.  Papertrey Ink white was used for the card base.

Bright, festive, easy to mail, and easy to reproduce with my MISTI.

Here are a few variations…

wDSC_7553    wDSC_7556

Thanks for checking out my card projects!

This content uses referral links as described in the disclosure policy on my sidebar.

 

“Tea Bag Fold” Rustic Christmas Tree

“Tea Bag Fold” Rustic Christmas Tree

wDSC_7756

It has been a while since I had created a “tea bag fold” Christmas tree and thought it would be fun to make another one for this card.  (HERE is my first one, and here is a tutorial on how to make it.)

Paper used on this card is Snowflake Mix (#712257), Wooden Fence (#154484), and Textured Cream Sheet Music (#142950) which are all by The Paper Studio.  The card base is Recollections heavy weight ivory.  I inked all the edges and the burlap ribbon with Gina k Charcoal Brown ink.

The “wooden” panel was cut with a die from the Spellbinders “Curved Rectangles” (S4-006) die set.  The star was made with a Fiskars punch (#03-026386).

The Modsquad Challenge this week is “Non Traditional Christmas Colors” where we are to use non traditional colors on our cards; no red, green, silver, or gold.  Anything else is good.  (Sadly, this site is no longer active.)

Over at the Die Cut Diva’s, the challenge this month is “Winter Time” where we are invited to share our winter-themed cards and projects.  In addition to the theme, all cards/projects must be made using at least one die cut or embossing folder (using any die cut machine including Cameo and Cricut machines).

Thanks for checking out my card project!

This content uses referral links as described in the disclosure policy on my sidebar.

Rustic Snowman Christmas Card

Rustic Snowman Christmas Card

vvDSC_7753.jpg

This card features a snowman made with the Sizzix/Tim Holtz Bigz “Assembly Snowman” die (#658770).  The panels behind him were cut with a die from the Spellbinders “Labels Nine” set (S4-233).

The greeting is from the Gina K “Christmas Wishes” set and was stamped with Gina K Dark Chocolate ink.  I used this to ink all the edges as well. To add a little color/texture to the scarf and band on the hat, I pounced Dark Chocolate ink all over the pieces with a snowflake stamp from the Gina K Designs “Seasonal Sentiments” stamp set.

For paper and card stock, I used Gina K Kraft, Papertrey Ink Rustic Cream, Recollections corrugated kraft, a piece of brown from the Recollections “Coffee and Cream” heavy weight card stock pack, and “Wooden Fence” (#154484) by The Paper Studio.

I embossed the cream mat behind the corrugated panel with a Darice “Snowflake Swirls” embossing folder.  Because the corrugated panel was cut with the largest die in the set, there was no die to create the cream mat behind it, so I cut it the same size, cut it up the middle, and offset each half on both sides of the corrugated panel.

The Modsquad Challenge this week is “Non Traditional Christmas Colors” where we are to use non traditional colors on our cards; no red, green, silver, or gold.  Anything else is good.  (Sadly, this site is no longer active.)

Over at the Die Cut Diva’s, the challenge this month is “Winter Time” where we are invited to share our winter-themed cards and projects.  In addition to the theme, all cards/projects must be made using at least one die cut or embossing folder (using any die cut machine including Cameo and Cricut machines).

Thanks for checking out my card project!

This content uses referral links as described in the disclosure policy on my sidebar.

Teddy Bear Tote Bag

Teddy Bear Tote Bag

xxDSC_7751

I was asked to make a teddy bear tote bag for a little guy named Daniel.  This bag is to hold a teddy bear and bear-themed books which he will receive for Christmas.

The fabric, iron-on teddy bear was made from a cut file called “Teddy Bear” (Design ID #3350) by Rivka Wilkins that I purchased in the Silhouette Store.

This was my first time cutting fabric with my Silhouette, and I was really impressed with how well the machine handled the job!  I purchased Fabric Quarters (Light Brown, Brown, and Taupe) from Joann Fabrics.  These are small, very light weight, flimsy pieces of cotton.  I had watched a few YouTube videos on how to create iron-on, fabric die cuts, and it was recommended that the fabric be treated with a fabric stiffener first.  I did not do this, and it did not seem to matter.  After cutting scraps of each color to size and ironing out the creases (as best I could!), I ironed (on high heat) pieces of Pellon Wonder-Under Interfacing (#805) onto the backs of each piece.  (I intended to buy Heat’n Bond since that is what was recommended on the videos, but they did not seem to have it; the Pellon Interfacing worked great!)  Then, with a fabric blade in my Silhouette and the fabric setting chosen in the cut settings, I cut the fabric pretty much the same way you’d cut card stock.  Once the pieces were cut, I removed the paper backing from the back of the interfacing and ironed them in layers and in place onto the bag.

I used my Bigkick and my Sizzix Fun Serif alphabet dies (upper and lower case) to cut the letters after backing the fabric with the interfacing.  The dies cut the fabric beautifully as well!

xDSC_7737.jpg

Thanks for checking out my tote bag project!

This content uses referral links as described in the disclosure policy on my sidebar.