Floral Palette Screen Divider and Shutter Cards

Posted in Birthday Cards, Cards, Creative Folds, Holiday Cards, Mother's Day by lisababitz

Floral Palette Screen Divider Cards and Shutter Cards

(back: Wishing you a very happy birthday”

In my last post, I shared a few cards I made with the beautiful patterned paper called “Floral Palette” by Recollections.

Here are a few more cards I made using this same paper.

The pattern on the top of this paper is quite different from that on the bottom, and these patterns flow from left to right beautifully so I decided to keep the two patterns “as-is” for my screen divider cards. I had made a screen divider card last year and decided to “warm up” with the same punches. (Instructions on how I made these are included in that post.)

You can get 5 panels across the 12×12 inch page, and choosing two different groups of 4 gave me two variations.

This card is from the top (left) half:

Here’s another card from the top (right) half:

After I completed those, I played around with the bottom half of the paper and with a few different punches and dies for a different look. Here’s my third card (also shown at the top of this post):

Floral Palette Shutter Cards

In addition to screen divider cards, flowing patterns also make great panels on shutter cards. (HERE is a video tutorial on making this type of card.) I left the “inside” blank and could add a stamped or hand-written message when the card is needed.

To see the supplies used, click here…

Continue reading →

19Oct2018

Easel Card with Negative Framed Scene

Posted in Birthday Cards, Cards, Creative Folds, Father's Day, Holiday Cards by lisababitz

Easel Card with Negative Framed Scene

For this card I used the negative of a “happy” die cut (the part left after the die cut is removed from the card stock) and a printed scene behind it. I embossed the frame around the “scene” and the stamped greeting with a wafer thin stitched rectangle die using my Cuttlebug and a Spellbinders embossing mat. (The “sandwich” I use for embossing with a thin die is A-plate, B-plate, embossing mat, card stock, die with cutting edge facing paper and embossing mat, B-plate, and a chipboard shim.)

I created a few more designs with different scenes, greeting stamps, and color combinations.

For this final sample, I did not emboss the panel with the rectangle die. Instead, I sprayed speckles of ink onto the card front using a Tim Holtz marker spritzer tool and a Vintage Photo distress marker.

To create the easel card base, I started with a piece of card stock measuring 6 1/4 inches by 10 inches and scored it at 5 inches and 2 1/2 inches. (I chose these measurements because they worked with the dies and stamps I was using. You basically just need to fold your card base in half and the front in half again.) The separate panel you decorate for the card front should be the same size as the folded card base; in my case it was 6 1/4 inches by 5 inches. After folding the card base in half, fold the front of the card base up along the 2 1/2 inch score line (like a “z”), and adhere your decorated card front panel to the half portion showing. (If you unfold the front of the card base after adhering the decorated panel, the decorated panel should flip to the inside of the card.) Stamp a greeting on a separate panel. Adhere the greeting panel to the inside of the card base with foam tape. (It needs to be raised up slightly; this piece will hold the “easel” card front when opened.) Your raised greeting panel will be hidden inside the card when the card is “closed” and only the decorated card front is showing.

The “happy” die is called “In a Word: Happy Cutaway” by Winnie & Walter . The scenes I used behind the “happy” negatives were google images. Photos and patterned paper would work also.

This card folds flat for mailing.

Thanks for checking out my card projects!

This content uses referral links as described in the disclosure policy on my sidebar.

17Oct2018

Jar of Blooms for Mother’s Day

Posted in Cards, Holiday Cards, Mother's Day by lisababitz

Jar of Blooms for Mother’s Day

(My card is a CASE inspired by the card shown below.)

(This card is one I made back in the spring and am just getting around to posting now…)

As I mentioned in my “Fun Daisies” post, a friend of mine wanted to give card making a try and found a few cards online that she thought she’d like to CASE. (This was the second sample she found.) Since I was able to find supplies that closely matched the ones used, I copied the original design pretty closely to make my “class” sample.

Here is the original card :

(This card was created by Mrs. Noofy and was posted on Splitcoaststampers, March 18. 2016)

Like in the original, I stamped the mason jar on vellum with and cut it out with scissors. The jar is from the “Mason Jars” set by Inkadinkado, was stamped with Memento Tuxedo Black ink, and adhered with mini glue dots.

Score lines and faux stitching were made with my mini scoring board, a bone folder, and a dressmaker’s tracing wheel.

The flower pieces were made with a punch, and before the layers were glued together, I sprayed them with water, shaped them with my Heartfelt Creations Flower Shaping Tool Set, scrunched them up, and let them dry. The punch I used for the larger flowers was the EK Success Hydrangea Confetti Punch. The smaller flowers were made with the Fiskars Flower Lever Punch (small). A sprinkle of Redland Elements was added to the centers.

I loved the leaves used on the original card but was unable to get the punch set in time for our lesson, so I used the leaves from the Spellbinders D-Lites Flowers and Stem die set instead.

The stems were from the “Tranquil Tulips” stamp set by Stampin’ Up (retired?) and were stamped with Gina K Grass Green ink before the vellum jar was added.

The greeting is from the “Happy Mother’s Day” stamp set by Studio G and Papertrey Ink Scarlet Jewel ink.

I used Gina K Innocent Pink, White, and Grass Green card stock and Papertrey Ink Scarlet Jewel for the mat.

Here is another sample (5 x 7 inch) with flowers made from the Spellbinder D-Lites Blooms Three set. (I shaped the petals but did not scrunch them up on this card.) I also stamped the larger jar image directly onto the card panel using Papertrey Ink Soft Stone ink. Water color paper was used for the focal panel and card base.

Thanks for checking out my card projects!

This content uses referral links as described in the disclosure policy on my sidebar.

12Jun2018

Wetlands Father’s Day Card

Posted in Cards, Father's Day, Holiday Cards by lisababitz

Wetlands Father’s Day Card

(Inside: Thinking of you especially today and wishing you a Happy Father’s Day)

This card was made with images from the Stampin’ Up “Wetlands” (retired) and “Timeless Textures” stamp sets and sentiments (inside and out) from the “Father’s Day Innies & Outies” set from My Sentiments Exactly.

Ink used was Stampin’ Up Soft Suede and Sahara Sand along with Tim Holtz Stormy Sky distress ink.

I used Papertrey Ink white card stock for the card base. The printed papers were Textured Leather, Textured Slate Blue, and White Linen all by The Paper Studio.

A Spellbinders Standard Circles die was used to create the round window. The blue and white panel and the greeting were popped up with foam tape to add dimension.

The card below was my first attempt. I liked it, but I wanted to jazz it up a bit, so I continued playing and came up with the card above.

Thanks for checking out my card projects!

This content uses referral links as described in the disclosure policy on my sidebar.

6May2018

Roses for Mother’s Day

Posted in Cards, Creative Folds, Holiday Cards, Mother's Day, Valentine's Day by lisababitz

Roses for Mother’s Day

This box card, designed to look like a dozen roses in a tall vase, was made with a cut file designed by Snapdragon Snippets called “Rose Bouquet Tall Valentine Box Card” (Design ID# 73758) that I purchased in the Silhouette Store and cut with my Silhouette electronic die cutting machine. An assembly tutorial is provided HERE. The file contains Valentine’s Day elements for the front of the vase, but I decided to create this project as a Mother’s Day card instead. I had to laugh – after receiving this card, my mother called to thank me and to tell me she loved the flowers (not card) I sent! 🙂

I created a few additional elements that were not included with the file I purchased (a solid piece to go behind all the leaf panels because the veins were open and you could see through the “holes” in each of the leaves and the white and light gray mats on the vase).

The bow was created with my We R Memory Keepers 123 Punch Board and my paper crimper. (It was much easier to “roll” the card stock after it had been crimped; it kept bending and creasing on me when it was flat.)

The card stock and paper used was Gina K Cherry Red, Christmas Pine, white, gray from the Recollections “Coffee and Cream” heavy weight pack, green from the Recollections Christmas pack, American Crafts #368312 (polka dots), and The Paper Studio Silver Wedding Texture (#352070).

There is room on the back for a stamped or handwritten message.

Often, box cards fold flat and fit in regular envelopes making them easy to mail. However, this card is quite tall (about 11.25 inches) and is about 7 inches wide when folded flat. And it was suggested in the tutorial that foam tape or pop dots be used to separate the leaf layers from the bud layers to add a bit more dimension. As a result, the size and thickness of this card necessitated a larger envelope (I used a padded mailer) and a trip to the post office for mailing.

Thanks for checking out my card project!

This content uses referral links as described in the disclosure policy on my sidebar.