Embossed Snowman – Original Post

The snowman on this card was made with the Sizzix Snowman & Hat Bigz die which also came with a bonus embossing folder that fits the die.    The snowman was cut from Gina K Pure Ivory card stock, and the hat was cut from a scrap of textured black DCWV card stock.  The arms were cut freehand from a scrap of black.  Ribbon and gems were added to finish him off.

The background panel is Gina K Kraft card stock embossed with the Darice Snowflake Swirl folder.  The frame was cut using my trimmer from a piece of Pebbles “Mary” card stock from the Walnut Grove collection.  The Card base is Gina K Pure Ivory.

The greeting stamp is from the Gina K Designs “Winter Cheer” set and was stamped with versamark and heat embossed with gina k black embossing powder on kraft card stock and matted on pure ivory.  A scrap of ribbon, jute and a glittered, wooden mini snowflake ornament from Michaels were added to the greeting banner.

In later versions of this card, I used metal snowflakes instead of the wooden ones because I ran out of them.  I also changed the greeting using a stamp from the Hampton Arts “Outlines – Season’s Greetings” stamp set.

This card was made for the Perfectly Rustics Challenge No. 36 – Embossing – where we are to use wet or dry embossing on our project. I used both.  (http://perfectlyrustics.com/2014/11/17/prdc-36-embossing/)

Thanks for checking out my card project!

This content uses referral links as described in the disclosure policy on my sidebar.

Have An Udderly Wonderful Christmas!

This card was made for the Mod Squad Challenge called – Timed Challenge!  One Layer Card – where we were to make a one layer card and note how long it took to complete – the quicker the better!  (Sadly, this site is no longer active.)

First of all, this card was FUN to make!  I had ink pads flying out of my hand, washi tape everywhere, and a mess on my desk that appeared faster than I ever thought possible!  (Somehow, I ended up with a cut on the back of my hand that I have no idea how I got!)  When I finished, I was imagining all us crazy crafters working at the speed of light, and I just started cracking up!  (It’s a good thing I was home alone at the time because I’m sure I sounded a little crazy!!)  I was so giddy and charged up that I actually considered a glass of wine until I realized it was only 8:30 in the morning so I chose to skip my second cup of coffee instead.  PHEW!!!

I included making the card base, setting up my stamp-a-ma-jig image templates and cutting my Washi tape in my reported times.  (I had already pulled out the stamps I wanted to use.)  Without the hats, this card was done in 2 minutes and 24 seconds.  Here is what it looks like without the hats:

The total time to make the card when you include stamping and coloring the hats, fussy cutting them, running them through the sticker maker, and adhering them to the card was 5 minutes and 58 seconds.

To make this card, I started with a Gina K Pure Ivory card base.  I taped a piece of Recollections “Gift It Christmas” Washi Crafting Tape onto my paper trimmer and sliced it in half lengthwise (it was originally 1 1/8 inch wide.) and adhered a strip to the top and bottom of my card base.  I stamped all the images in Memento Tuxedo Black ink and used the stamp-a-ma-jig for placement.  The greeting is by “I Break For Stamps.”  The cows are from the Gina K Designs “Primitive Blessings” set, and the hats are from the Gina K Designs “Winter Cheer” set where I stamped the two snowmen and the penguin on white scrap paper, colored the hats with Copic Markers R29 and E40, and then fussy cut the hats, ran them through my mini xyron sticker maker and adhered them to the card.

I discovered a few time savers as I worked through my initial plan.  The first time I tried cutting the washi tape, I started with a piece just slightly longer than the width of the card base.  I couldn’t get the two “halves” to be perfectly even; I’m not sure why since I was using the marks on the trimmer. (Probably because I was rushing!)  So then I just took a piece that was about a foot long and cut that in half.  The one strip was big enough to cover the top and bottom and was uniform in size since it started out as one piece.  The other half could be used for a second card or to decorate the inside of the card or the envelope.  I hadn’t use Washi tape much before, and I was pleasantly surprised at how easy it was to work with.  It is pretty forgiving in that you can easily remove it from your project if necessary, but it seems to stay put when you are done with it. Since I was rushing, it kept tangling and sticking to itself, but it was really easy to separate and flatten it.  It is also really thin, so it adds no bulk to your card at all.

To get the hats, I placed all three stamps on the same, large acrylic block and stamped them all at once.  The other thing that saved a bit of time was coloring the hats before they were cut out.  I was able to color them quickly while not worrying about going out of the lines since that would all be cut away.  I also realized that I needed to color in the ivory color (brick white) first.  When I used the red first, it seemed to want to bleed into the brick white.  This didn’t happen as much when the brick white was already there and dry.

I’m not sure I would be able to keep up the fast pace if I were making lots of these cards, but they are definitely simple enough to mass produce in a reasonable amount of time!  (Now, if I could just figure out how to do speed-photography and speed-blog-posting!!!)

Thanks for checking out my card project!

This content uses referral links as described in the disclosure policy on my sidebar.

Tea Bag Fold Christmas Tree Tag

This tag was made for the Mod Squad Challenge – Tag Time – where we are to make a Christmas tag.  (Sadly, this site is no longer active.)

And it is also being entered in the Perfectly Rustics Challenge No. 36 – Embossing – where we are to use wet or dry embossing on our project.  (http://perfectlyrustics.com/2014/11/17/prdc-36-embossing/)

It is also being entered in the Simon Says Stamp Wednesday Challenge – We’re Seeing Stars – where we are to include a star on our project. (http://www.simonsaysstampblog.com/wednesdaychallenge/simon-says-were-seeing-stars/)

For this tag, I created a Christmas Tree using the tea bag folding technique.  Click HERE to see how it is done.  The paper used to make the tree was Pine Green Plaid by Paper Pizazz.  The trunk was made with a scrap of Gina K Christmas Pine card stock and embossed with the Tim Holtz Alterations wood grained embossing folder.  The polka dotted card stock behind the tree is the back of Basic Grey’s Grape Vine from the Plumeria collection.  The large tag itself was cut from Gina K Christmas Pine card stock using the Tim Holtz alterations Moves & Shapers Bigz Die – Tags and Bookplates and embossed with the Sizzix (Stampin’ Up) Stripes embossing folder, although it’s hard to see that it is embossed in the photo.  The greeting is stamped from a portion of the sentiment stamp from the Gina K Designs “A Gift For You” duo stamp set (retired?).  (The whole sentiment didn’t fit on my mini tag.)  The greeting was stamped with versamark and gina k Christmas pine embossing powder.  The mini tag that it is mounted on is cut from a Heartfelt Creations die from a set called Decorative Flower Pot (HCD 732).  The silver star charm was colored with Copic Marker E49 to make it match the rusty pin better.  It was pinned to the ribbon along with the mini tag.  The back is covered with a white panel which covers the ribbon and provides a place to write the “to” and “from” information for this gift tag.

Here is the tag on a card base.  For the red panel, I used Gina K Cherry Red card stock and embossed it with the Cuttlebug D’Vine Swirls embossing folder.   The card base is more of the Basic Grey paper used on the tag.

Thanks for checking out my project!

This content uses referral links as described in the disclosure policy on my sidebar.

Lots of Dots Christmas Tree Tag

This tag was made for the Mod Squad Challenge – Tag Time – where we are to make a Christmas tag.  (Sadly, this site is no longer active.)

This tag is also being entered in the StampTV MIUM Challenge – “All Things, Great and Small” – where we are to incorporate both large stamped images and very small stamped images into our card design.  I used the small polka dotted circle stamp to build my tree and a larger greeting stamp.  (Sadly, this site is no longer active.)

And it is also being entered in the Perfectly Rustics Challenge No. 36 – Embossing – where we are to use wet or dry embossing on our project.  (http://perfectlyrustics.com/2014/11/17/prdc-36-embossing/)

Finally, it is being entered in the Simon Says Stamp Wednesday Challenge – We’re Seeing Stars – where we are to include a star on our project. (http://www.simonsaysstampblog.com/wednesdaychallenge/simon-says-were-seeing-stars/)

I used the larger polka dotted circle stamp from the Gina K Designs “Fabulous Holiday Fillers” stamp set and gina k Christmas pine ink to create the Christmas tree on ivory card stock.  I used a stamp-a-ma-jig and graph paper to line up the circles.  Then I colored self-sticking rhinestones with Copic marker R89 and adhered them in the spaces between the stamped circles.  The greeting is from the Gina K Designs “Merry Tree” duo (retired?) stamp set and was also stamped in the Christmas pine on ivory card stock.  Gina K red hot and Christmas pine card stock was also used.  The cream colored background card stock is My Mind’s Eye Nutmeg “Boy” Southwest Paper from the Indie Chic collection and was embossed with the Hobby Solution Lattice embossing folder.  Red raffia and a silver star charm finished off the tag.

Thanks for checking out my project!

This content uses referral links as described in the disclosure policy on my sidebar.

Folded Doily Christmas Tree

This card was made for the Mod Squad Challenge – Grandma’s Attic – where we are to incorporate a doily into our card or project.  (Sadly, this site is no longer active.)

For this 5″ x 7″ card, I started with an 8″ doily and sponged Viva moss green metallc 3D Stamp Paint on the front and back.  Click HERE to see how I made the tree.  For the trunk, I sponged Tim Holtz walnut stain distress ink onto a Ranger mini craft stick.  I wrapped jute around the tree and made a bow for the top.   The tree was adhered to the tag with pop dots.

I made a tag using glossy card stock and the Tim Holtz alterations Moves & Shapers Bigz Die – Tags and Bookplates.  Stampin’ Up Early Espresso and Soft Suede reinkers and foam shaving cream were used to create the marbleized effect on the tag.  First, a large blob of shaving cream was sprayed on a paper plate.  Then, several drops of each of the two inks were added to the shaving cream.  The colors were swirled (not mixed) around with a craft stick.  The glossy tag was placed, face down, on the shaving cream and ink.  Once the whole tag had made contact with the shaving cream, it was removed from the plate and placed on my craft mat.  Then the shaving cream was scraped (or “shaved”) off with a metal ruler.  What was left behind once the shaving cream was removed were the swirls of ink.  I used the (Tonic) Tim Holtz paper distresser on the edges of the tag and then inked the rough edges with Tim Holtz walnut stain distress ink.

The greeting stamp was from the Gina K Designs “Merry Tree” duo and was stamped on Gina K dark chocolate card stock with versamark ink and Recollections champagne embossing powder.  The panel’s edges were distressed, and then it was pinned to the tag.

The background paper is “Reindeer Fly” from the My Mind’s Eye Holly Jolly collection.  It was also distressed and inked with the walnut stain ink.  The card base is Gina K dark chocolate card stock.

Thanks for checking out my card project!

This content uses referral links as described in the disclosure policy on my sidebar.